·Non contact measurement, ultrasonic probe does not come into contact with the measured medium, has no risk of wear, corrosion, etc., has a longer service life, and is easy to maintain.
·High detection accuracy and accurate flow measurement. The flow rate of the open channel is detected with an accuracy of 1mm as the liquid level changes. The flow rate of the open channel changes with every 1mm change in the liquid level.
·Adapt to various weir grooves: support various weir grooves in both national and ISO versions: Basher groove, triangular weir, rectangular weir (customizable width), and can input custom flow relationship formulas.
·Large screen with backlight graphic LCD display, optional menu system in Chinese/English.
·The flow unit can be set, the cumulative flow can be adjusted, and there are various practical custom settings.
·The open channel flow host has powerful functions and can provide up to 6 relay switch signals. It can accumulate pulse output of flow and provide MODBUS-RTU digital signals.
·Customizable solar power supply and wireless transmission functions.
(+86) 0411- 84646800 | Applicable specifications of weir trough: ISO version: Parshall trough (No. 1~23) |
| Applicable specifications for weirs and troughs: ISO version: edged/edgeless rectangular weir (25/50/75/100cm, custom rectangular width) |
| Applicable specifications for weirs and troughs: ISO version: triangular weir (30°/45°/60°/90°/120°) |
| Applicable specifications for weirs and troughs: ISO version: Customized weirs and troughs |
| Applicable specifications of weir trough: National standard version: Parshall trough (No. 1~25) |
| Applicable specifications for weirs and troughs: National standard version: rectangular weir (25/50/75/100cm) |
| Applicable specifications for weirs and troughs: National standard version: right-angled triangular weir |
| Applicable specifications for weirs and troughs: National standard version: Customized weirs and troughs |
| Liquid level resolution: 1mm |
| Liquid level error: 1mm or 0.2% of full scale (calm water) |
| Display mode: graphic LCD display (with backlight) |
| Parameter setting method: 3-digit touch-sensitive buttons (handheld operator optional) |
| Instantaneous flow display range: 0.000-999999L/S or m3/h or m3/min (automatic adjustment) |
| Maximum cumulative flow rate display: 99999999.9 m3/h |
| Analog signal output: one DC4-20mA current, corresponding to instantaneous flow |
| Load resistance: 0 ~ 500Ω |
| Digital communication: RS485 serial communication, standard MODBUS-RTU protocol |
| Relay output: upper limit, lower limit alarm and control (instantaneous flow and water level) |
| Relay mode: normally open/normally closed (can be set) |
| Number of relays: up to 6 |
| Relay specifications: 5A 250VAC/30VDC |
| Power supply: DC: DC24V (±10%) 0.2A |
| Power supply: AC: AC220V (±20%) 0.1A |
| Ambient temperature: -40℃ -+75℃ |
| Shell material: ABS |
| Shell protection level: IP67 |
| Cable gland: PG9/PG11/PG13.5 |
| Installation method: wall-mounted |
| Overall dimensions: 250x185x125mm |
| Measuring range: 0.00-4.00m (liquid level) |
| Blind area: 0.20m |
| Working temperature range: -40℃ ~ +75℃ |
| Shell protection level: IP68 |
| Shell material: ABS/PVDF |
| Probe pressure range: 0.07MP～0.3MP (abs.) |
| Probe lead-out cable: standard length is 10 meters (can be extended to 1000 meters) |
| Probe transmitting beam angle: 8° (3db) |
| Installation method: thread, flange, bracket |
(+86) 0411- 84646800
